U are no longer able to view the folders recover data from your hard drive and no data is accessible. Damn! Its all gone. Your have not even backed up your data anywhere and it was important documents and dear pictures that you can not afford to loose.
This is a situation that happens with almost every PC and Laptop user as every hard drive fails, sooner or later. But don’t panic! The data can be recovered.
Try these methods to recover data from your dead hard Drive:
Always turn off your PC and check for basic faults before drawing any conclusion about the hard drive. Sometimes its just the cables that are not plugged properly or have gotten loose. Make sure the power and data cables are snugly attached at the ends.
Also check for any physical damages on the body of the hard drive.
The easiest way to connect the drive to another PC is by using a USB IDE/SATA ADAPTER. If you do not have one available you can manually insert the hard disk into another PC as secondary device.
Make sure the computer detects the hard drive in BIOS before it starts up or you wont be able to access the drive. There is a huge possibility that the drive may start working on the other PC and fault is in your motherboard.
1. Use Linux to Recover Data
Sometimes you can get confused between a damaged file system and a hard drive failure. A damaged file system can also cause the Windows to not be able to see the drive. Running a file system repair can also get the problem solved.
1. Run Data Recovery Software
when you get sure the fault is in the hard drive itself you should download any of the different softwares that are available on the internet for data recovery. Many of these softwares are free of cost and are efficient to get the job done for you.
Rocuva, PC Inspector File Recovery, Hiren’s BootCD and GetDataBack are good softwares for data recovery. Mac users can use MiniTool Mac Data Recovery and Disk Drill to get the job done.
1. Freeze the Hard Drive
Sometimes the shaft of the drive expands due to over heating. This creates a blockage between the shaft and the bearings which seizes the hard drive from working.
Keeping the hard drive enclosed in a plastic bag in the freezer for some time allows the material to shrink and get back to its original state, hence, clearing space for the shaft and bearings to turn.